Line Card Models; Line Card Components; Line Card Leds In An Ex6200 Switch; Figure 15: Line Card Leds On A 48-Port Rj-45 Line Card In An Ex6200 Switch - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches

Line Card Models

Line Card Components

Related
Documentation

Line Card LEDs in an EX6200 Switch

34
Table 20 on page 34 provides the model number, the name of the line card model, and
the Junos OS release in which the model was first supported.

Table 20: 48-Port SFP Line Card Model

Model Name
EX6200-48F 48-port SFP line card
The 48-port SFP line card (see
Forty-eight 1-gigabit small form-factor pluggable (SFP) ports, which can house SFP
transceivers
Line card LEDs—Two status LEDs labeled
the online and status information for the line card. See
Switch" on page 34.
Network port LEDs—Two LEDs per network port that indicate the link activity and
status of each port. See
Installing a Line Card in an EX6200 Switch on page 160
Handling and Storing Line Cards in EX6200 and EX8200 Switches on page 231
The line cards in EX6200 switches have two status LEDs labeled
faceplate (see Figure 15 on page
indicate the online and status information of the line cards.
NOTE: The 48-port PoE+ line card has an additional LED labeled
faceplate that indicates the PoE status of the line card (see
Figure 16 on page
Figure 15: Line Card LEDs on a 48-Port RJ-45 Line Card in an EX6200
Switch
Junos OS Release Required
13.2X50-D10 or later
Figure 14 on page 33) has:
and
ON ST
"Network Port LEDs in an EX6200 Switch" on page
34, Figure 16 on page
35).
on the faceplate that indicate
"Line Card LEDs in an EX6200
36.
and on the
ON ST
35, and Figure 17 on page 35) that
PoE
Copyright © 2014, Juniper Networks, Inc.
on the