Component Descriptions; Chapter 2 Component Descriptions; Lcd Panel In An Ex6200 Switch - Juniper EX6210 Complete Hardware Manual

CHAPTER 2

Component Descriptions

LCD Panel in an EX6200 Switch

Copyright © 2014, Juniper Networks, Inc.
LCD Panel in an EX6200 Switch on page 19
Chassis Status LEDs in an EX6200 Switch on page 24
Field-Replaceable Units in an EX6210 Switch on page 25
Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch on page 26
SRE Module LEDs in an EX6200 Switch on page 28
Uplink Port LEDs in EX6200 Switches on page 29
Management Port LEDs in EX6200 Switches on page 30
48-Port RJ-45 Line Card in an EX6200 Switch on page 31
48-Port PoE+ Line Card in an EX6200 Switch on page 32
48-Port SFP Line Card in an EX6200 Switch on page 33
Line Card LEDs in an EX6200 Switch on page 34
Line Card Model and Version Compatibility in an EX6200 Switch on page 36
Network Port LEDs in an EX6200 Switch on page 36
AC Power Supplies in an EX6200 Switch on page 38
AC Power Supply LEDs in an EX6200 Switch on page 47
DC Power Supply in an EX6200 Switch on page 49
DC Power Supply LEDs in an EX6200 Switch on page 52
Cooling System and Airflow in an EX6210 Switch on page 54
Backplane in an EX6210 Switch on page 56
The LCD panel is on the front faceplate of the Switch Fabric and Routing Engine (SRE)
module on the right side. Your switch can have up to two LCD panels, one for each SRE
module installed in the chassis.
The LCD panel on the master SRE module shows two lines of text with a maximum of
16 characters in each line. This LCD panel displays a variety of information about the
switch and provides menu options to perform basic operations such as initial configuration
and switch reboot.
19