48-Port Rj-45 Line Card In An Ex6200 Switch; Line Card Models; Figure 12: 48-Port Rj-45 Line Card; Table 16: Link/Activity Led On The Management Port On Ex6200 Switches - Juniper EX6210 Complete Hardware Manual

Table 16: Link/Activity LED on the Management Port on EX6200 Switches

LED
Link/Activity

Table 17: Status LED on the Management Port on EX6200 Switches

LED
Status
Related
Documentation

48-Port RJ-45 Line Card in an EX6200 Switch

Line Card Models

Copyright © 2014, Juniper Networks, Inc.
Color
Green
Table 17 on page 31 describes the Status LED (administrative status).
Color
Green
Connecting an EX Series Switch to a Network for Out-of-Band Management on page 188
The line cards in EX6200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. See
an EX6210 Switch" on page
You can remove and replace them without powering off the switch or disrupting switch
functions. See Figure 12 on page

Figure 12: 48-port RJ-45 Line Card

Captive
screw
Ejector
lever Line card LEDs
This topic describes:
Line Card Models on page 31
Line Card Components on page 32
Table 18 on page 32 shows the model number, description of the line card model, and
the Junos OS release in which the model was released.
State and Description
Blinking—The port and the link are active, and there is link
activity.
On steadily—The port and the link are active, but there is no
link activity.
Off—The port is not active.
State and Description
On steadily—Administrative status is enabled.
Off—Administrative status is disabled.
12. The line cards are hot-insertable and hot-removable:
31.
RJ-45 ports
Chapter 2: Component Descriptions
"Slot Numbering for
31