Specifying The Setting For "Memory Rx Mode - Konica Minolta bizhub 161f User Manual

7.9 Setting Up the Reception

Specifying the Setting for "MEMORY RX MODE"

1
Select the "RX OPERATION".
❍ Refer to "Selecting the "RX OPERATION" menu" on page 7-64.
2
Press the [1] key from the 10-Key
Pad to select "MEMORY RX
MODE".
3
Using the [ ] and [Ö ] keys, select
Ö
"ON", and then press the [Yes]
key.
4
Using the 10-Key Pad, enter the
time for memory reception to
begin, and then press the [Yes]
key.
❍ To specify that memory
reception stays on from the time that it is set to "ON" until it is manually
canceled, press the [Yes] without entering a start time. (Skip to step 6.)
5
Using the 10-Key Pad, enter the
time for memory reception to end,
and then press the [Yes] key.
6
Using the 10-Key Pad, enter the 4-
digit password used to cancel
memory reception, and then press
the [Yes] key.
❍ If no password is to be
specified, press the [Yes] key without entering anything.
The "RX OPERATION" menu appears again.
bizhub 161f
7
7-65