Speed Dial Number Linking - Toshiba 2000 series User Manual

Speed Dial –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
To store longer
dialing strings, see
"Speed Dial Number
Linking" on Page
To insert a pause or
flash signal in the
number, see
Dial Pause and Flash
Storage" on Page
 
4. Press
To clear a telephone number on a Station Speed Dial button
Repeat the previous procedure on
To program one-touch telephone number dialing
Repeat the previous procedure on
CO line access code before the telephone number. See
107.
To make a call using a Speed Dial button or access code
1. Access a CO line.
If your
been programmed to
automatically do this,
skip this step.
"#
2. Press
" # 
...or
Then enter Speed Dial
access code (see
Table 15 on Page
109).
60
64.
"Speed
63.
. The number is stored.
"#
button has
The system dials the telephone number assigned to the button/
code. If your
.
skip Step 1.
Page 59, skipping Step 3.
Page 59, except for Step 3. For Step 3, press [PDN] +
"CO Line Access Codes" on Page
"#
button is "one-touch," as explained above,
Strata DK Digital Telephone