Co Line Access Codes - Toshiba 2000 series User Manual

Access Codes
This appendix contains access codes for outside Speed Dial numbers, CO lines, Paging Group
and Paging Zone Codes.

CO Line Access Codes

CO lines are used when you dial an outside number. If your telephone does not have a
button, you can enter the appropriate code listed in
 
You can also store the code on a Speed Dial (
storing a CO line access code onto a Speed Dial code, enter
(e.g., to store code
In some systems,
System users are required to dial
programmed with LCR, you may not hear internal dial tone, depending on system
programming.
See your System Administrator for the code which applies to your telephone.
To access a line
Press [PDN] + CO Line Access Code
Table 12 CO Line Access Codes
DK14
DK16e
DK40
Appendix
, enter ).
! !
is used as a general group code or to access Least Cost Routing (LCR).
7
in order to access an outside line. If you press
7
System
Table 12 to access an outside line.
) button for one-touch access. If you are
"#
before the CO access code
CO Line Access Codes
% $ &$ #  & #
or or
% $ &$ $  & $
or or
% $ &$ $  & !
or or
A
or
6
in a system
7
107