Toshiba 2000 series User Manual page 42

Call Forward ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Remote Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding
destination from a telephone outside of the system.
To change the destination number
1. Call into the DK
system over a CO line
programmed for the
DISA feature.
2. After you receive dial
tone, press
dial your [PDN].
3. Enter the Remote Call
Forward-External
security code.
4. Enter the new
destination number.
You can enter an
internal number,
Voice Mail number or,
a CO line access code
plus an external
telephone number.
With some systems,
you can dial a line
group code instead of
a CO line number
access code. (See
Appendix A—Table 1
for access code
information.)
5. Press
30
You hear ringback tone signal, then internal dial tone for 10
seconds.
Try again if you hear busy tone.
Note
You hear a confirmation tone.
4
then
If a number is not dialed, the system automatically makes the
DISA CO line ring as a normal incoming call. Then, if the call
is not answered within 15 seconds after the ringing starts, it
disconnects.
You hear a confirmation tone. See the System Administrator
for the security code which is assigned to your telephone in
system programming.
. You hear a confirmation tone.
See the System Administrator for DISA telephone
numbers.
Strata DK Digital Telephone