Toshiba 2000 series User Manual page 23

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Table 5 Using Vol /Vol
Feature
Microphone Sensitivity
Handset/Headset Call
Waiting Tone
Muted Tone Burst
Note
Tone sent for Busy
or DND Override,
Call Transfer with
Camp-on, etc.
Ringing, Handsfree
Answerback, and Speaker
OCA.
Speaker
The Grand Tour
with Other Buttons
Phone
Status
On-hook/
Off-hook
On-hook/ While pressing,
Off-hook hold

On-hook/ While pressing,
Off-hook hold

On-hook
On-hook
On-hook,
idle
Press
While pressing, The Mic LED flashes about six
  
hold and times while setting the sensitivity.

/ for three When the microphone is set for
seconds. the lowest or normal sensitivity,
the Mic LED lights steady when
the telephone is busy on a
speakerphone call.
The tones are received over the
 
and handset/headset and speaker.
The tones are received over the
 
and speaker.
[DN] followed by You hear the muted tone for 15
 
then seconds or until disconnected by

/ pressing
 !
followed by Your phone rings for 15 seconds
 
/ or until disconnected by pressing

you can hear ringing at a
distance from your telephone.
[DN] followed by After you press a [DN], you hear
 
/ dial tone.
Adjusts Internal and CO Dial
Tone, Background Music.
Volume Controls
Comments

.
. Enables you to check if
11