Making A Call Using Speed Dial; Storing A Station Speed Dial Number - Toshiba Strata DKT3010F-S User Manual

Advanced Operation

Making a Call Using Speed Dial

There are three ways to begin a Speed Dial Call.
*
1. Dial
Spdial
...or press
Speed Dial
...or press the
2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers occupy numbers
100~199. System Speed Dial numbers occupy numbers 200~999.

Storing a Station Speed Dial Number

There are three ways to store a Station Speed Dial number, including Programming Mode, Access
Codes and through system programming by your CTX System Administrator.
To store a Station Speed Dial Number using User Programming Mode
#9876
1. Press to enter User Programming Mode. The LCD shows "USER PROG MODE."
2. Press the fixed
MODE." If this display does not appear, see your CTX System Administrator to determine if Speed
Dialling memory is assigned to your telephone.
1
3. Press . The LCD shows "INDEX NUMBER."
4. Enter the two digits which, combined with the
Example: Entering
number in the upper left corner. If there is already a number stored, it appears below the Speed Dial
Number.
5. Enter the desired destination. It appears in the lower right of the LCD. Instructions are given below
for more complex dialling strings, usually telephone numbers.
6. Press the fixed
PROGRAMMED."
7. If you want to enter another number, press the fixed
The LCD shows "SPEED DIAL MODE."
Spdial
8. Pressing
Speed Dial mode. Lift and replace the handset to exit User Programming altogether.
Strata CTX DKT3000/2000-Series Digital Telephone October 2002
on a DKT3000-series telephone
feature key on any DKT.
Spdial
button or the Speed Dial feature button. The LCD shows "SPEED DIAL
09
would result in storing Station Speed Dial Number
Spdial
button or the Speed Dial feature button. The LCD shows "DATA
or the Speed Dial feature button again toggles you between User Programming and
1
, form the Station Speed Dial Number.
Spdial
button or the Speed Dial feature button.
Speed Dial
109
. The LCD shows this
51