Speed Dial Pause And Flash Storage; Speed Dial Number Linking - Toshiba Strata DK 2000-series User Manual

Speed Dial Pause and Flash Storage

Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Hookflash
The button stores a flash
signal only if
is programmed as a flexible
button on the telephone. The
flash signal is 0.5 or 2 seconds
long (set in system
programming) and is displayed
on the LCD as "F-".
Press
...or enter the hookflash dial
code ( +

Speed Dial Number Linking

You can link any of the Station Speed Dial numbers to System Speed Dial codes or to
any of the optional buttons associated with these codes. This enables up to 36 digits to
be stored under one Station Speed Dial button or code.
The number directly stored in the System Speed Dial number dials out first, then the
number linked to it. Typically, a company's special carrier access telephone numbers
are stored as part of the digit string.
A designated station can be used to link System Speed Dial codes. See the
Note
System Administrator's User Guide.
Important!
Strata DK Digital Telephone 6/00
Regular Pause
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays "P-".
Press
...or if
on the telephone, press
to store a pause.
).
Before linking Speed Dial Numbers, make sure the System
Administrator has stored the desired number in the System Speed Dial
you plan on using.
Speed Dial–Advanced Features
Long Pause
Ten-second pause, which can
be entered anywhere in the
Speed Dial number. The LCD
displays "L-".
Press
is not
Features
.
75