Chapter 4 - Add-On Module/Dss Console; Dadm - Toshiba 2000 series User Manual

Add-on Module/DSS Console
This chapter provides an equipment overview of the following two optional units and
describes the features buttons and their associated LEDs.
Digital Add-on Module (DADM) – add 20 feature buttons to 2000-series digital
telephones. Up to two DADMs can be connected to a telephone.
Direct Station Selection (DSS) Consoles – available for system operators who do not
have an attendant console. (See

DADM

The DADM, model DADM2020, is shown in
programmed for [DSS], CO line access, and Station or System Speed Dial. Directory Numbers
or other functions cannot be assigned to DADMs.
Each [DSS] and
assigned to it.
The [DSS] LED flashes green when the station equipped with an DADM is calling or
transferring an outside call to a station. (If calling a station, the LED turns steady red when
the called station answers; if transferring to a station, the LED turns steady red when you
hang up to complete the transfer.) The DSS LED is steady red whenever the station
associated with the DSS is ringing, busy, or in the DND mode.
A Line (CO) LED is green when the CO line is in use by the DADM console user. It is red
if it is in use by another telephone user.
Add-on Module/DSS Console
"DSS Console" on Page
button has an LED that provides a status of the CO line or station
 
101.)
Figure 4 on Page 100. The buttons can be
4
99