Isdn Outgoing Calling; Subaddress - Toshiba 2000 series User Manual

ISDN Outgoing Calling

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ISDN Outgoing Calling
This feature enables you to make outgoing call using an Integrated Services Digital Network
(ISDN) trunk, provided that you are connected to a Strata DK424 system with Release 4.0, or
higher, and that you subscribe to ISDN lines. ISDN trunks offer faster call connection setup,
and they also provide more connection circuits.
Making an ISDN outgoing call will either be handled automatically with a timer or by you
initiating the ISDN "Start" sequence. The method depends on your system's programming.
See your System Administrator to determine the method.
To make an outgoing call to an ISDN trunk
1. Access an outside CO
line
2. Dial the number.

3. Press

Subaddress

Subaddress digits may be required for dialing another department, or to send a call to
equipment, such as a printer. If you need to enter subaddress digits, follow these instructions:
To make an outgoing call with a subaddress to an ISDN trunk
1. Access an outside CO
line
2. Dial the number.

3. Press
4. Enter the subaddress.

5. Press
46
. The dialed digits will not be sent until you press this button or
until the timer expires.

. The button informs the system that the following digits
are the subaddress.
. The dialed digits will not be sent until you press this button or
until the timer expires.
Strata DK Digital Telephone