Xerox DOCUMATE 252 User Manual page 45

Scanning
40
Size—Click Standard, click the menu arrow and choose a
page size from the list, or click Custom and enter the horizontal
and vertical page dimensions in the boxes. The maximum size
is 8.5" by 14". The units of measurement can be inches or
centimeters. Click the name of the units, inches or centimeters,
to toggle between them.
Improvements and Settings—Only the options that apply to
the selected Destination Application are available. The options
AutoCrop to Original and Straighten Image do not apply to your
DocuMate 252 scanner.
• Reduce Moire Patterns—Moire patterns are wavy, rippled
lines that sometimes appear on the scanned images of
photographs or illustrations, particularly newspaper and
magazine illustrations. Selecting Reduce Moire Patterns
will limit or eliminate moire patterns in the scanned image.
This option is only available for the Grayscale or Color
Mode at 200dpi or less.
• Invert Image—Only available for Black&White Mode, this
option reverses the black and whites of an image.
Original Image
• Duplex—Scan both sides of the page. If this option is not
selected, the scanner will scan the front side of the page
only.
NOTE: Because you can set Duplex and Simplex for the
OneTouch buttons, there could be a conflict when you press the
Simplex or Duplex button on the scanner. Regardless of the
OneTouch setting, the scanner button always takes precedence.
In other words, even if the LED number on the scanner has a
setting for Duplex, when you press the Simplex scanner button
the scanner scans in Simplex mode, and vice versa.
• Skip Blank Originals—Skips pages that are completely
blank. Typically you use this option when you will scan a
stack of two-sided pages which have a number of blank
sides. This option is only available for Duplex scanning.
Inverted Image
DocuMate 252 Scanner User's Guide