Xerox DOCUMATE 252 User Manual page 26

The button number and
name.
The Destination Application.
This is the application that
opens when you are finished
scanning.
DocuMate 252 Scanner User's Guide
NOTE: Some of the options on the OneTouch Properties
Window (and other OneTouch windows and dialog boxes) are
"grayed out" and are not available. Grayed out options are not
appropriate for your DocuMate 252 scanner. For example, on
the figure below, the option "Use Document Feeder" is selected
and "grayed out" because the DocuMate 252 is an ADF scanner
and always uses the document feeder, so there's no reason for
you to select it. If you use the OneTouch application with other
Xerox scanners, grayed out options become active, if
appropriate.
The following example of the OneTouch window shows the settings
for Button 2. The button is set to scan with the scan configuration
named Color Document and then open ScanSoft PaperPort to
display the scanned image. The Format and Page(s) option is set
to scan in the PDF image format.
The settings on the Properties window are:
Select Destination—the list of applications that can open to
display the scanned image for the selected button. To configure the
list of available applications, click the Options tab at the top of the
dialog box and select the desired options. See "Selecting Options
for a Button" on page 35 for more information.
Scanning
Click to select
options.
The file format of
the images of
the scanned
item.
The settings that
the scanner uses
when scanning
with the currently
selected button
(in this case
button 2).
21