Xerox DOCUMATE 252 User Manual page 16

DocuMate 252 Scanner User's Guide
Your computer recognizes that a scanner has been plugged
into the USB port and automatically loads the appropriate
software to run the scanner.
2. When the software is finished loading, return to the "Complete
the installation by connecting your hardware" window and click
OK to complete the installation process.
You can also click More to see a quick overview about
accessing and navigating the OneTouch Button Panel. When
you're finished reading the additional information, click OK.
The scanner's status light is green when the scanner and
computer are communicating properly.
3. Click Close on the Installation Complete window.
4. When installation is finished, restart your computer.
5. If you selected additional software to install from the CD, leave
the CD in the CD drive and restart your computer after the
additional software installation has completed.
If you removed the CD from the CD drive and want to install
other software, reinsert the CD into the drive.
In addition to installing the other software from the CD, you can
also view and print the User Guides.
Installation
11