Siemens Gigaset talk & surf 6.0 Operating Instructions Manual page 54

ì
In the Receive MSN section, select all the MSNs the device is to react to for incoming
calls. To do this, activate the MSNs in the On column.
A registered Bluetooth mobile telephone is entered in the MSN list of the
MSN Settings tab as GSM. An internal device can use GSM as the Send or
i
Receive MSN.
You will find more information about this topic in Chapter "Assigning a
Bluetooth mobile telephone to an internal device" on page 23.
ì
Make any further changes you want:
– Enter a device name with up to 16 characters.
– Select Authorisation. The default authorisation is Unrestricted.
– In the Receive MSN section click the Ring delay column. Select the number of
rings for each MSN.
– Activate the Call waiting option to permit "call waiting" for a second call.
– Activate the Hunt group option to add the device to the internal call all group.
– Activate the Auto. seizure option to get the outside line when you pick up the
receiver.
– Activate the Send MSN selection after seizure option, if you want to dial the
Send MSN before each call.
ì
Click Apply.
The new settings will be sent to the base station. The device list will now be updated.
If you want to change the settings for several devices, you can select the
i
device list rows without clicking Apply. Your changes remain unaffected
while switching between devices.
Detailed description
"Device settings" on page 142
Further information
"Entering multiple subscriber numbers (MSN)" on page 53
"Assigning a Bluetooth mobile telephone to an internal device" on page 23
Configuring the base station
51