System Adjust - Xante Ilumina GL User Manual

System Adjust

Item
Power Save
Time
Clearable Warning
Auto Continue
Manual Timeout
Wait Timeout
Low Toner
Jam Recovery
Value Description
5 min Sets the period after which power save mode starts.
15 min
30 min
60 min
240 min
Online When Online is selected, you must manually clear the
Job warning by pressing the Online button. Change to Job
if you wish the message to automatically clear when a
new print job is received.
ON Sets whether the Ilumina is automatically recovered
OFF when Memory Overfl ow or Tray Request occurs.
OFF If paper is not fed within this time in manual feed, the
30 sec job is cancelled.
60 sec
OFF Sets the time period between stopping receipt of job
5 sec data and forced print. For PS, printing is not carried
10 sec out and the job is cancelled.
20 sec
30 sec
40 sec
50 sec
60 sec
90 sec
120 sec
150 sec
180 sec
210 sec
240 sec
270 sec
300 sec
Continue Sets the printing operation when insuffi cient toner is
Stop detected. Continue: the Ilumina can continue printing
while remaining online. Stop: the Ilumina stops
printing and goes offl ine.
ON ON: continues printing the job, including any
OFF jammed pages, once the jam has been cleared. OFF:
Cancels a job including the page currently jammed.
Ilumina GL Users Guide 73