Xante Ilumina GL User Manual page 50

3. Carefully remove any paper on the belt.
Remove Paper
4. If paper is jammed in the fuser unit, push the lock lever (3) in the direction
shown to release the unit.
Be careful not to touch the fuser unit which may be hot after printing. If the
fuser unit is hot, wait until it cools before attempting to remove any jammed
paper.
Holding the fuser unit (4) by the handle, lift it out of the Ilumina and place it on
a fl at surface.
5. Pull up the jam release levers (5) and remove the jammed paper.
5
Jam Release Lever; Remove Jam
6. Carefully replace the fuser unit into the Ilumina and turn the lock lever (6) in
the direction shown to lock the fuser unit.
50 Ilumina GL Users Guidebb
4
Push Lever Lock
Replace Fuser; Lock Fuser Unit
3
6