Interfaces And Connection; Connecting The Parallel Interface - Xante Ilumina GL User Manual

6. Press the Enter button to select Confi guration.
7. Press the Enter button to execute the command and a Confi guration document
is printed.
8. After printing the confi guration document, the Ilumina returns to the ready to
print status.
9. You can use this document to check your Ilumina confi guration. System values
and installed accessories are listed at the top of the fi rst page while status
values and settings follow.

Interfaces and Connection

Your Ilumina is equipped with a selection of data interfaces:
• Parallel—For direct connection to a PC. This port requires a bi-directional (IEEE
1284 compliant) parallel cable.
• USB—For connection to a PC running Windows 98 or above (not Windows 95
upgraded to Windows 98) or Macintosh. This port requires a cable conforming to
USB version 2.0 or above.
The Ilumina may not work if a USB-compatible device is connected concurrently
with other USB-compatible machines.
When connecting multiple printers and/or digital color presses of the same type,
they appear as *****, ***** (2), ***** (3), etc. These numbers depend on the
order of connecting or turning on each of these devices.
• Ethernet—For network cable connection .
Interface cables are not supplied with your Ilumina.

Connecting the Parallel Interface

1. Turn off the Ilumina and the computer.
2. Connect a parallel cable between the Ilumina and computer.
Ilumina GL Users Guide 35