Table of Contents
Advertisement
Connecting to Printer Ports (continued)
2.
Plug the 36-pin connector into the
printer's parallel port and the 25-pin
connector into the computer's parallel
port.
3.
Turn on both machines.
4.
Configure for ECP or bidirectional
parallel port mode in your computer
setup (i.e. BIOS or CMOS).
Note:
Before using your printer, install
and configure the Adobe PostScript
printer driver and your printer's
PPD.
Ethernet Port (Macintosh & PC)
1.
Turn off your printer and your com-
puter.
Ethernet Port
RJ-45
Connector
Fig. 32 Connect to Ethernet port.
2.
Connect one end of the CAT 5 Ethernet
cable to your printer's Ethernet port.
3.
Connect the cables other end to the
appropriate port on your network.
USB Connection (PC only*)
Connector
To Host Computer
Fig. 33 USB Cable
1.
Plug the cable's square, smaller connec-
tor into the printer's USB port.
2.
Plug the thin, larger connector into the
computer's USB port.
Note:
It is not necessary to turn off your
printer or computer before plugging
in the USB.
*USB does not support Windows 98 or Me
9
Media Types
The AW1200 can handle a wide variety
Connector
of media such as:
To Printer
•
Plain paper
•
Transparencies
•
Laser-quality labels
•
Envelopes (No. 4 only)
•
Tracing paper
•
Postcard stock
Note:
The print area is 5 mm (0.197")
from all edges, except with No. 4
envelopes which is 10 mm. Also,
Advertisement
Table of Contents
