Normal Operation - Danish Interpretation Systems DCS 6000 User Manual

Digital conference system central unit with firmware 5.3.xx or later

Hide thumbs Also See for DCS 6000:

User manual (66 pages)

User manual (19 pages)

User manual (59 pages)

Table Of Contents

Table of Contents

Danish Interpretation Systems

If the user accepts the save the progress display is

shown:

Saving...

The display is shown for a few seconds before the

CU returns to the "Main menu".

Understanding "Save" and "Load" Setup

When saving the configuration, the setting that has

been done in the various menus in CU 6010, at the

IS 6132 Interpreter Sets and at AO 6008 Audio Unit

will be saved in the 'Flash' memory in the CU

6010.

Also the serial number and type of all units

connected to the CU 6010 at the time of saving the

configuration will be saved in the 'Flash' memory

in the CU 6010.

When switching on power to the CU 6010 at a later

stage, then the units connected will be compared to

the saved configuration. If some units are not

present, they will be reported as 'missing'

When 'loading' a configuration the last settings,

which has been saved in the 'Flash' memory in the

CU 6010 will be re-loaded to the CU 6010, to the

IS 6132 Interpreter Sets and to the AO 6008 Audio

Unit.

When switching the power to the CU 6010 OFF and

then ON, the last saved setting will also be loaded.

Firmware info menu

By choosing 'Firmware info' from the main menu

information about the software version of the

PowerPC and the DSP is shown as well as the

Serial Number of the unit.:

PPC:

DSP:

Serial No:

The user returns to the main menu by pressing

either the Menu button or the Enter button.