Technical Specifications - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems

Technical specifications

Digital Section
Sound quality ......... 24 bit audio @ 32 kHz sampling frequency
Analogue Section
Floor output signal type............................... electronic balanced
Nominal output level: ...........................0 dBm at nominal input
Nominal output level .......................... -8 dBm at nominal input
Max. output level.................................... 3,5V RMS +13 dBm
Line input signal type .................................. electronic balanced
Max. input level .......................................................... +30 dBm
Input impedance ......................................................... 100 kohm
Frequency response .................................................... 50-15kHz
Signal to noise ratio: .................................................. >85 dBA
Total harmonic distortion: .............................................< 0.1%
General
Power consumption ...............................................max. 600VA
In-rush current ...............max. 30A@115V or max. 60A@230V
Mains voltage: ....................................... 100 - 240V, 50 - 60Hz
Supply voltage for units (for each: A1, A2, B1, B2) .48V/125W
Temperature to guarantee specified performance
..............................5 Deg C. to 40 Deg C. (35 to 80% humidity)
Storage temperature
.......................... -20 Deg C. to 60 Deg C. (10 to 80% humidity)
Weight .............................................................................. 4,5 kg
Dimensions (W x H x D).......... 425 (483) x 87 x 317 (357) mm
dimensions in bracket are including 19" brackets
Accessories supplied .............................................. User manual
.................................................................................Mains cable
...........................................................5 pieces termination plugs
Connectors
DCS 6000 network chain (DCS-LAN) .................4 pieces RJ45
Max. number of units to be connected to each chain:
MU 6040 Microphone Units ...................... up to 80 pieces
DM/CM 60x0P Delegate/Chairman Unit ...up to 42 pieces
IS 6132P Interpreter Set..............................up to 54 pieces
CS 6032F Channel Selector ..................... up to 110 pieces
The actual max. number of units depends on the length of
the feeding cable and interconnection cables
Line output...............................................XLR3 male connector
Line input..............................................XLR3 female connector
RS 232 (with hardware handshake) ...................D-Sub 9 female
RS 422 (with hardware handshake........................D-Sub 9 male
................................either the RS232 or the RS422 can be used
System performance with CU 6010 as
central unit
Max. number of units (excl. CS).........................................1000
Max. number of IS 6xxx in one booth ....................................32
Max. number of IS 6xxx .......................................................150
Max. number of AO 6008 .......................................................20
Max. number of CS 6032...........................practically unlimited
Max. number of languages......................................................31
Max number of open microphones............................................8
Max. system performance
Max. number of units (excl. CS).........................................4000
The DCS 6000 system conforms to all relevant standards -
e.g. IEC 914, ISO 4043, and ISO 2603
Specifications are subject to change without notice.
Manual 01 18 04438
User Manual
33