Page 1
ΤΗΛΕΦΩΝΙΚΗ ΣΥΣΚΕΥΗ SIEMENS 805 S • Overview of Euroset 805 S • Installation • Setting dialing method • Setting the volume of tone ringing • Last number Redial • Saved number redial • Speed dialing • Repertory keys • Mute •...
Spiral handset cord Insert connector (at long straight end) into socket marked until it is heard to engage. Attach short end to handset. Connecting cord Insert the one connector into socket on lower side, and insert the other connector into wall socket. Secure connecting cord in cable guide provided. The signaling method of your telephone must be set to MF tone dialing or loop disconnect (LD) dialing (depending on the dialing method of the telecommunication station) before you put your telephone into operation.
Temporary changeover with only if tone/pulse switch is set to "P" - Once a connection has been set up, you can switch to MF tone dialing by pressing (e.g. to operate an answering machine). The telephone automatically reverts to dial pulsing once the connection has been cleared down.
Saved number redial Storing The number dialed can be stored while a call is in progress by pressing the MEMO key M . This number is remains stored even if other calls are subsequently made. Dialing Lift the handset and press M A number remains stored until a new number is stored with the MEMO key M Speed dialing...
Lift the handset and press the speed dialing key/MEM . Enter the speed dialing destination between 0 and 9. • A dialed number is not stored if it contains more than 15 digits. • You can delete the number assigned to a specific key by overwriting it.
Storing during a call Press the SET key twice followed by the repertory key on which the number is to be stored. Repertory dialing Lift the handset and press the repertory key . The number stored on this key is immediately dialed. Please see note under " Speed dialing ".