Function Buttons - Yamaha D24 Owner's Manual

Yamaha digital multitrack recorder owner's manual
Hide thumbs Also See for D24:
Table of Contents

Advertisement

16
Chapter 2—Touring the D24

Function Buttons

A
EDIT button & indicator
This button is used to access the edit functions. The EDIT indicator lights up when this
button is pressed. The D24 must be stopped to use the edit functions. See "Editing
Projects" on page 77, "Editing Tracks" on page 85, and "Editing Parts" on page 95 for
more information.
B
V. TRACK SELECT button & indicator
This button is used to access the Virtual Track function. The V. TRACK SELECT indi-
cator lights up when the Virtual Track function is on. See "Using Virtual Tracks" on
page 51 for more information.
C
UTILITY button & indicator
This button is used to access the utility functions. The UTILITY indicator lights up
when this button is pressed. The D24 must be stopped to use the utility functions.
D
VARI SPEED button & indicator
This button is used to access the Varispeed function. The VARI SPEED indicator lights
up when the Varispeed function is on. The Varispeed function can be set while the D24
is stopped or during playback.See "Using Varispeed" on page 55 for more information.
E
ABS/REL button
This button is used to set the counter mode to either Absolute (ABS), the default set-
ting, or Relative (REL). See "Using Absolute & Relative Zero" on page 49 for more infor-
mation.
F
CAPTURE button
This button is used to capture time positions while the D24 is stopped or during
rewind, fast forward, playback, recording, or rehearsal. Captured values appear on the
2nd line of the display and can then be located or stored. See "Storing Locate Points" on
page 64 for more information.
G
REMAIN button & indicator
This button turns on the Remain function, which shows how much recording time is
available. The REMAIN indicator lights up when the Remain function is on. See
"Checking the Time Remaining" on page 38 for more information.
H
SETUP button & indicator
This button is used to access the setup functions. The SETUP indicator lights up when
this button is pressed. The D24 must be stopped to use the setup functions.
I
UNDO/REDO button & indicator
This button is used to undo or redo the last recording or edit. See "Undoing a Recording
or Edit" on page 35.
D24—Owner's Manual
TIME DISPLAY
CAPTURE ABS/REL
6
5
VARI
UTILITY
SPEED
4
3
V. TRACK
EDIT
SELECT
2
1
REMAIN
7
SETUP
8
UNDO/
REDO
9

Advertisement

Table of Contents
loading

Table of Contents