Epg (Electronic Programme Guide); Lcn (Logical Channel Numbering) - Strong SRT 82 User Manual

NOTE:
Adding channels to favourite lists
Channels from the can be added to up to 4 different favourite groups. Press FAV in Programme Edit
to access the function. Use pq to select a channel you wish to add to a favourite group. When the
highlight is on the channel of your choice, press FAV. A Favourite Type can be selected from the pop-
up list. Use pq to select the favourite list you wish to add the channel to and press OK, press EXIT
to finalize the process. Favourite channels will be marked with a star symbol. When all changes have
been made, press EXIT. A Saving banner will pop up.
To de-select a channel from a Favourite list, repeat the above procedure, but select Disable from the
pop-up list.
Rename
Use pq to select a channel you wish to rename. Then press Recall. A pop-up keyboard will show
on screen. Use t u pq to select characters/functions and enter them with OK. When you have
finished editing, select OK to enter the changes. When all changes have been made, press EXIT.

7.2 EPG (Electronic Programme Guide)

The Electronic Programme Guide is a very useful function that allows you to view event schedules
and programme information and to mark events/movies for recording. To access the EPG, press the
EPG button in viewing mode or select it from the Main menu in the Programme section. Use t u to
select a channel and pq to select an event. Detailed information of the selected event will show in
the right-hand window. If more than one information page is available, use YELLOW and/or BLUE
to access it. To mark the event for recording, press OK. A pop-up entry field will appear. Check if the
entry is as you wished, all items can be changed if needed. For recording it is important to change
the Mode from View to Record, otherwise, the unit will only wake up at the selected time. Press OK to
confirm the timer for a selected event. The Schedule overview will show. Use the suggested buttons
at the bottom of the screen to Add manually, Edit, or Delete a timer.
NOTE:
NOTE:

7.3 LCN (Logical Channel Numbering)

If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the broadcaster,
channels will be stored in a broadcaster defined order. Set LCN to On to activate broadcaster defined
channel numbering or Off to store channels in found order. This function only applies when a new
channel search is performed.
12
Deleted channels can only be retrieved if you do a frequency scan in the
Channel Search menu again.
Availability of EPG data depends on broadcast.
An event can only be recorded if a suitable USB device is connected.