First Time Installation - Strong SRT 5005 User Manual

S. EDIT
Program edit.
T. TEXT
Shows current service's Teletext on OSD (On Screen Display).
U. SUB
Show the list of subtitled languages the current channel supports.
V. RECALL
Switches back to previous channel.

8.0 First Time Installation

Make sure that your terrestrial receiver correctly connected to your Television and a terrestrial antenna
and that the signal quality is good enough. Confirm that the power plug of the receiver is plugged into
the wall outlet. Turn on the receiver. The following picture is shown at the first time.
It is recommended that you perform the first time installation following Installation Wizard step by step. This
will help you easily achieve system configuration and channel installation. If you are a professional installer
then you can skip the wizard by pressing EXIT button and set-up the channels using the Channel Search menu.
Press UP/DOWN to choose your language, press OK to confirm. The preference menu will appear as below.
10
SCREEN 1
SCREEN 2
PART 1 English