First Time Installation; Main Menu; Channel - Strong SRT 5001 User Manual

PART 1 • English
7. EXIT
8. pq
9. tu
10. OK
11. EPG
12. INFO
13. FAV
14. SUBTITLE Shows list of subtitled languages
15. [0~9]
16. AUDIO
17. PAUSE
18. TV/RADIO Toggles between TV or RADIO mode
19. TXT
20. COLOURED BUTTONS for Teletext functions

4.0 FIRST TIME INSTALLATION

If you use the receiver for the first time, the "Easy Install" menu appears. Use the
tu buttons to change settings for setup of Region, OSD Language and Antenna
Power and the pq to select. Then use the pq buttons to move focus to Search
and press OK to proceed with the automatic channel scan.

5.0 MAIN MENU

In viewing mode always press MENU to enter the Main Menu. It consists of
following submenus: Channel, Installation, Setup, Tools and Media+

5.1 Channel

1. Use the pq buttons to select Channel and press OK to enter.
2. Use the pq buttons to highlight the desired item and press OK to select.
3. Press EXIT to exit.
Note: You can also press OK in TV mode to enter channel list.
5.1.1 TV Channel list
1. In Channel submenu select TV Channel List with the pq buttons and
press OK to enter.
Exits from the menu or sub-menu
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
Menu Off: Increases/decreases the volume level.
Menu On: Change settings n specific Menus
Menu On: Activates the highlighted menu item.
Menu Off: Displays the current channel list
Shows the EPG (Electronic Program Guide) in TV mode
Shows the actual channel information
Favourite group selection
Channel selection or value input
Sets the current audio channel to left, right or stereo
Freeze/Resume picture
Shows Teletext on OSD (On Screen Display) if applicable
7