Remote Control; First Time Installation; Main Menu - Strong SRT 55 User Manual

3.1 Remote Control

1.
2. 0~9
3.
4. RECALL
5. PAGE+/PAGE-
6. VOL+/VOL-
7. CH+/CH-
8. OK
9. MENU
10. EXIT
11. INFO
12. SUB
13. EPG
14. ●
15. TIMESHIFT
16. tt / uu
17. TTX
18. TV/RADIO
19. AUDIO
20. GOTO
21. COLOURED BUTTONS For Multimedia and Teletext functions
The remote control transmits a directional infrared beam. Be sure to aim the remote
control directly at the infrared sensor of the unit during operation. If the sensor has
been covered or there is a large object between the remote control and the sensor, the
sensor will not respond. The sensor may not able to receive the remote signal when it
is exposed to direct sunlight or a strong artificial light (fluorescent or strobe light). In
this case, change the direction of the light or reposition the unit to avoid direct lighting.

4.0 FIRST TIME INSTALLATION

If you use the receiver for the first time, the "Easy Install" menu appears. Use the tu
buttons to change settings for setup of Region, OSD Language and Antenna Power
and the pq to select. Then use the pq buttons to move focus to Search and press
OK to proceed with the automatic channel scan.

5.0 MAIN MENU

In viewing mode always press MENU to enter the Main Menu. It consists of following
submenus: Channel, Installation, Setup, Tools and Media+
6
Turns the receiver On/Standby
Channel selection or value input
Mutes audio output of the receiver
Back to previous shown channel
Page up/down
Menu Off: Volume up/down; Menu On: navigation & change settings
Menu Off: Channel up/down; Menu On: navigation
Menu Off: Displays the current channel list;
Menu On: Activates the highlighted menu item.
Menu Off: Opens the main menu. Menu On: You will get one step back.
Multimedia: Go to upper folder
Exits from the menu or sub-menu
Shows the actual channel information
Shows list of subtitle languages
Shows the EPG (Electronic Program Guide) in TV mode
Records the TV program to the SD card
Activates the timeshift function
Fast rewind / Fast forward
Shows Teletext on OSD (On Screen Display)
Toggles between TV and RADIO mode
Shows list of the current audio channel /language
Only used to go to desired position in Record/Playback mode
PART 1 • English
Fig. 7, 8