Remote Control; First Time Installation; Main Menu; Channel - Strong PRIMA IV User Manual

PART 1 • English

3.3 Remote Control

1. Turns the receiver On/Standby
2. 0~9 Channel selection or value input
3. FAV Favourite group selection
4. Mutes audio output of the receiver
5. MENU Opens the main menu
Within menu you will get one step back
6. EXIT Exits from the menu or sub-menu
7. pq
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
8. tu
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
9. OK Menu On: Activates the highlighted menu item.
Menu Off: Displays the current channel list
10. EPG Shows the EPG (Electronic Program Guide) in TV mode
11. INFO Shows the actual channel information
12. TXT Shows Teletext on OSD (On Screen Display)
13. RCL Back to previous shown channel
14. SUB Shows list of subtitled languages
15. EDIT Opens the channel list
16. MOSAIC Show pictures of 9 channels on the screen
17. PAUSE Freeze/Resume picture
18. P+/P- Page up/down
19. TV/R Toggle between TV or RADIO mode
20. AUDIO Sets the current audio channel to left, right or stereo
21. AV Toggle between TV and AV mode
22. Coloured buttons for Teletext and other functions

4.0 FIRST TIME INSTALLATION

If you use the receiver for the first time, the "Easy Install" menu appears. Use the tu buttons to change settings for setup of
Region, OSD Language and Antenna Power and the pq to select. Then use the pq buttons to move focus to Search and
press OK to proceed with the automatic channel scan.

5.0 MAIN MENU

In viewing mode always press MENU to enter the Main Menu. It consists of following submenus: Channel, Installation, Setup
and Tools

5.1 Channel

1. Use the pq buttons to select Channel and press OK to enter.
2. Press EXIT to go one step back or exit MENU.
Note: You can also press OK in TV mode to enter channel list.
Fig. 4
5