Add-In Card Options - MATSONIC MS7023D Manual

Add-in Card Options

The mainboard has two features that can be used if you have installed
either a fax/modem card or a network adapter card.
WOL1: Wake on LAN
If you have installed a network adapter (LAN adapter), you can use the
cable provided with the card to plug into the WOL1 connector on the
mainboard. This is the Wake On LAN feature. When your system is in a
power–saving mode, any traffic through the network automatically
resume the system. You must enable this item using the Power
Management page of the setup utility. See Chapter three for more
information.
WOM1: Wake on Modem
If you have installed a fax/modem card, you can use the cable provided
with the card to plug into the WOM1 connector on the mainboard. This is
the Wake On Modem feature. When your system is in a power–saving
mode, any incoming calls to the modem automatically resume the
system. You must enable this item using the Power Management page
of the setup utility. See Chapter three for more information.
36
WOL1
WOM1