Table of Contents
Advertisement
The fax/modem card is an optional item supplied with this mainboard.
1. Locate the J4 fax/modem connector on the mainboard.
2. Remove the expansion slot blanking plate from the system chassis
that is adjacent to the fax/modem connector.
3. Install the fax/modem card on to the J4 connector as shown below.
The RJ11 Line and Telephone sockets on the bracket are positioned
in the expansion slot with the removed blanking plate.
Line and Tel
RJ11 sockets
J4
fax/modem
connector
38
Fax/modem
card
Advertisement
Table of Contents
