Installing Add-On Cards - MATSONIC MS9127C User Manual

Installing Add-on Cards

This mainboard has five 32-bit PCI (Peripheral Components Interconnect)
expansion slots, one 8xAGP slot, and one Communications and Networking
Riser (CNR) slot.
PCI Slots PCI slots are used to install expansion cards that have the 32-bit
PCI interface.
8xAGP Slot The 8xAGP slot is used to install a graphics adapter that supports
the universal AGP 3.0 specification and has a 1.5V-keyed connec-
tor.
Note: The above layout is for reference only. The AGP slot
Do not use AGP 2X card (3.3V) in this motherboard. It
will burn and damage the motherboard due to VIA
P4X400 chipset can't support AGP 2X(3.3V).
CNR Slot This slot is used to insert CNR cards with Modem and Audio func-
tionality.
Note: Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually con-
figure the card before installation.
may be different from your mainboard. Please refer to
actual shipment.
21