Install The Mainboard In The Case - MATSONIC MS7023D Manual

JP13: Select Normal/Flexible setting for socket-370 jumper
Use this 2-pin jumper to set the socket-370 to the normal setting or the
flexible setting. Some future high-performance socket-370 processors
require the flexible setting.
1
Function
JP13
Flexible PGA-370
2 Normal

Install the Mainboard in the Case

The mainboard is drilled with a series of holes. Most system cases have
mounting brackets installed in the case which correspond to the holes in
the mainboard. You can secure the mainboard in the system case by
placing the mainboard over the mounting brackets and driving screws
through the mainboard into the mounting brackets.
Note: Do not overtighten the screws as this can stress the
mainboard.
The illustration below shows a mainboard installing in a standard
desktop case.
Power Supply
Unit
I/O
Template
Jumper Cap
Short Pins 1-2
Open Pins 1-2
Expansion
Slots
Drive
Cage
19