Check the Jumper Settings
Check all the mainboard jumpers to ensure that the board is configured
correctly.
JP3
JP6
JP4
JP1 Clear CMOS Memory Jumper
This jumper lets you erase the system setup settings that are stored in
CMOS memory. You might need to erase this data if incorrect settings
are preventing your system from operating. To clear the CMOS memory,
turn off the system, disconnect the power cable from the mainboard, and
short the appropriate pins for a few seconds.
1
JP1
Function
2
Normal Operation
Clear CMOS
3
16
JP8
JP13
JP12
Jumper Cap
Short pins 1-2
Short pins 2-3
JP5
JP1