Table of Contents
Advertisement
Using the Expansion Slots
This mainboard has three 32-bit PCI expansion slots and one AMR slot.
PCI Slot: The PCI slot can be used to install add-in cards that have the
32-bit PCI (Peripheral Components Interconnect) interface.
AMR Slot: The AMR (Audio Modem Riser) slot is an industry standard
slot that allows for the installation of a special audio/modem riser card.
Different territories have different regulations regarding the specifications
of a modem card. You can purchase an AMR card that is approved in
your area and install it directly into the AMR slot.
AMR
PCI1
1. Before installing an expansion card, check the documentation for the
card carefully. If the card is not Plug and Play, you may have to
manually configure the card before installation.
2. Select which expansion slot you are going to use for your add-in
card.
3. In the system case, remove the blanking plate from the slot in the
system case that corresponds to the expansion slot that you are
going to use.
4. Position the edge connector of the add-in card over the expansion
slot. Position the metal bracket of the card in the empty slot in the
system case.
5. Install the edge connector of the add-in card into the expansion slot.
Press down quite firmly so that you are sure that the edge connector
is correctly seated in the slot.
34
PCI2
PCI3
Advertisement
Table of Contents
