Table of Contents
Advertisement
Infrared Port
This option can be purchased from third-party vendors.
SIR1
1. If you are installing an optional serial infrared port, connect the cable
from the optional IR port to the SIR1 connector on the mainboard.
2. After you have connected the cable, secure the optional IR port to
the appropriate place on your system case.
Note: An IR port may use some of the resources required by a
fax/modem card. If you have more than one of these items
installed, you may not be able to use them at the same time. You
can use the Peripherals page of the setup utility to switch
resources between an IR port and a second serial port. See
Chapter 3 for more information.
39
Advertisement
Table of Contents
