Table of Contents
Advertisement
6. Secure the metal bracket of the card in the empty slot in the system
case with a screw.
7. For some add-in cards, for example graphics adapters and network
adapters, you have to install drivers and software before you can
begin using the add-in card.
Metal bracket
Note: If you have installed an AMR card, you should check the
settings of jumpers JP4 (audio/modem enable/disable) and JP6
(select onboard codec or AMR codec). You should disable the
onboard audio/modem to avoid conflicts with the AMR card. You
can use the AMR codec chip (if it has one) or the onboard codec
chip.
PCI add-in card
Edge connector
PCI slot
35
Advertisement
Table of Contents
