Checking Jumper Settings; Jumper Settings - MATSONIC MS9127C User Manual

Checking Jumper Settings

The following illustration shows the location of the mainboard jumpers. Pin 1 is
labeled.

Jumper Settings

Jumper Type Description
JP1 3 pin Clear CMOS
jumper
JP2 3 pin CPU bus speed
select jumper
JP1 - This jumper enables you to reset BIOS. Follow these instructions:
1. Turn the system off.
2. Short pins 2 and 3 on JP1.
3. Return the jumper to the normal setting.
4. Turn the system on. The BIOS is returned to the de-
fault settings.
JP2 - This jumper enables to set the CPU frequency.
Setting (default)
1-2: Normal
2-3: Clear CMOS
1-2: Auto
2-3: 533 MHz
9
JP1
1
JP2
1