Technical Reference; Power Supply Specifications; Power Supply Input Voltages; Efficiency - MAXDATA PLATINUM 1600 IR User Manual

Hide thumbs Also See for PLATINUM 1600 IR:
Table of Contents

Advertisement

7 Technical Reference

Power Supply Specifications

Power Supply Input Voltages

100-17 V at 50/60 Hz; 8 A max.
00-40 V at 50/60 Hz; 4 A max.

Efficiency

The following table shows the efficiency of the power supply with an input voltage of 0 volts.
Table 6. Efficiency of the power supply
Load (% of maximum)
Efficiency

Power Supply Output Voltages

The table below lists the total wattage available from the power subsystem for each voltage. Ensure
that your loads do not exceed the combined total wattage of 650 Watts.
Table 7. Power Supply Output Capability
Voltage
+3.3 V
+5.0 V
+5 V Standby
+12.0 V (4 rails)
–12.0 V
CAUTION
The expansion slots on the server board are rated for no more than 5 Watts for any one slot. The
average current usage per slot should not exceed 1 Watts.

System Environmental Specifications

Table 8. Environmental Specifications
Temperature
Humidity
Acoustic noise
MAXDATA Server PLATINUM 1600 IR M
20%
81%
Maximum Current
18 A
30 A
3 A
54 A (20 A for one rail)
2.0 A
Non-operating
–40 °C to 70 °C.
Operating
10 °C to 30 °C; derated 0.5 °C for every 1000 ft
(305 m) to a maximum of 10,000 ft.
Non-operating
90 % relative humidity (non-condensing) at 30 °C.
7 Bels in sound power for a typical office ambient
temperature (18–24 °C).
The selection of peripherals may change the
noise level.
50%
100%
85%
81%
4

Advertisement

Table of Contents
loading

Table of Contents