Setting The Method For Numbering Pictures - Image Numbering Method - Pentax EI-200 Operating Manual

Setting the method for numbering pictures - Image numbering method

Set whether the numbering is started from [1] each time when a blank memory card is installed or
the number of times the shutter has been released from the first time when the camera is operated is
set as an image number (cumulative count) on the picture regardless of the memory card installed.
Setting the method of numbering the pictures
Reset the count when the memory card is blank (pictures are numbered from 1 by each memory
card), cumulative count (the pictures taken with this camera are numbered serially)
[Preferences] menu
[Image Counter] screen.
76
1
Displaying the image numbering method screen
1Turn on the power to set the mode dial to the capture
mode mark.
2Press the menu button to display [Capture settings]
menu.
3Press the right key on the four-way controller three
times to display the [Preferences] menu.
4Press the down arrow on the four-way controller five
times to highlight [Image Counter].
5Press the left soft key to select the soft menu [Edit].
The [Image Counter] screen appears on the display.
2
Setting the numbering method
1Press the down arrow on the four-way controller to
highlight the picture numbering method to be set.
[Reset When Empty] ... Each time a blank memory
card where no images are recorded is installed, the
stored pictures are numbered from [1].
[Continues Counter] ... The number of times the shutter
is released from the first time the camera is operated is
set as an image number (cumulative count) on the
picture regardless of the memory card installed.
2Press the left soft key to select the soft menu [Select].
The Preferences menu is displayed, with the selected
method being set.
3Press the right soft key to select the soft menu [Exit].
The pictures are numbered with the method set.