Pentax EI-200 Operating Manual page 65

[Image Stamp] menu
[Date/Time Stamp] screen before set-up
[Date/Time Stamp] screen after set-up
Type
You can set the type of the date and time to be stamped. Use the right and left arrows of the four-
way controller for selection.
[Date & Time] ....Both [date](month/day/year) and [time](hours: minutes) are stamped.
[Date] ..................Only [date] (month/day/year) is stamped.
[Time] ................Only [time] (hours : minutes) is stamped.
[None] ................Neither [date] nor [time] is stamped.
Changing the display format of [Date] or [Time]
If you want to change the order of year, month, and day of the date (i.e., month/day/year, year/
month/day, etc.) to be stamped, or the indication of time (i.e., 12-hour or 24-hour indication), go
to the [Set Up Date and Time] screen.
1
Show [Date/Time Stamp] screen
1Turn on the power supply and set the mode dial to the
shooting mode mark.
2Press the menu button, and the [Capture Settings]
menu appears.
3Press the right arrow of the four-way controller twice,
and the [Image Stamp] menu appears.
4While [Date & Time] is displayed in highlighted text,
press the left soft key to select [Edit] on the soft menu.
[Date/Time Stamp] screen is then displayed.
2
Setting the stamping format of date and time
1While [None] is displayed in highlighted text, press the
right and left arrows of the four-way controller to
indicate the type of date and time to be stamped.
2Press the lower arrow of the four-way controller, and
[Placement] is then displayed in highlighted text.
3Press the right and left arrows of the four-way controller
to select a stamping position.
4Repeat the same procedure until the background of
letters, the color of letters and the background color are
selected.
5After setting up the necessary items, press the right
soft key to select [Exit] on the soft menu, and the
[Image Stamp] menu appears.
If you want to resume the initial state, press the left soft
key to select [Default] on the soft menu.
6Press the right soft key to select [Exit] on the soft menu.
Now you can stamp the date and time on a picture
according to the settings.
p.74
Stamping Date & Time And Text On A Picture
63