Pentax EI-200 Operating Manual page 30

Handling of the Memory Card
¡Note that a memory card, if taken out, may be hot immediately after taking pictures.
¡Never eject a memory card or turn off the power during the data storage process or
communicating with another device. It would cause damage data or the card.
¡Do not bend a memory card or subject it to a strong shock; do not expose it to the water nor
leave it at a place of high temperature.
¡Be sure to format, before using, an unused memory card or a card used on another camera
( p.74).
¡Never attempt to eject a memory card while it is being formatted. If you do so, the card
would be fatally damaged.
¡It is possible for data stored in the memory card to be erased under the following condi-
tions, so please take care. Please be aware that Pentax bears absolutely no responsibility for
erased data.
• Mishandling of the memory card by the user.
• Memory card located at a place susceptible to static electricity or electrical noise.
• Card not used for a long period of time.
• Card ejected or power supply disconnected while the card access lamp is blinking.
Card Access Lamp
¡The memory card has a limited lifespan. The stored data may become corrupted if the
memory card is not used for a long period of time. Ensure that necessary data is backed up
to a personal computer etc. on a regular basis.
¡Avoid using or storing in places where static electricity or electrical noise is likely to occur.
¡Do not subject the card to bending, dropping or strong impacts.
¡Avoid using or storing in places where there are sudden temperature variations or conden-
sation, or in direct sunlight.
28