Pentax EI-200 Operating Manual page 132

130
2
To start receiving
1Press the menu button and the [Edit] menu is
displayed.
2Press the left arrow on the four-way controller twice and
the [Transmit] menu is displayed. [Camera-Camera] is
then displayed in highlighted text.
3Place the infrared data transmitter on the receiver side
facing towards the infrared data transmitter on the
transmitter side.
The infrared data transmitter
4Make sure that the transmitter side is in the transmis-
sion waiting mode, then press the middle soft key to
select the soft menu [Receive].
The [Waiting for connection...] message is displayed
on the LCD monitor.
5Press the left soft key on the transmitter side to select
the soft menu [Continue], and then the pictures will be
received.
Place two cameras facing each other.
Put the cameras closer and allow the
infrared data transmitters on each camera
to face each other.