Ae Metering Range Setting For Determining Exposure - Ae Metering - Pentax EI-200 Operating Manual

AE Metering range setting for determining exposure - AE Metering

Set AE Metering range of exposure on the screen when setting exposure.
Average metering
Set exposure based on the whole screen.
Center-weighted metering
Set exposure based on the main center area on the screen.
Spot metering
Set exposure based only on the center of the screen.
[Photo Assist] menu
The set AE Metering at present
Check mark
[AE Metering] screen
60
1
Displaying [AE Metering] screen
1Turn the power supply on and turn the mode dial to the
Capture Mode symbol.
2If the menu button is pressed, the [Capture Settings]
menu will be displayed.
3If the right arrow on the four-way controller is pressed,
the [Photo Assist] menu will be displayed.
4If the down arrow on the four-way controller is pressed
four times, [AE Metering] will be displayed in high-
lighted text.
5Press the left key to select the soft menu [Edit].
The [AE Metering] screen will be displayed.
2
[AE Metering] Setting
1Press the up and down arrows on the four-way
controller to display AE Metering range to be set.
2Press the left soft key to select [Select].
The selected AE Metering range is set and the [Photo
Assist] screen will be displayed.
3Press the right soft key to select the soft menu [Exit]
and capture status will be restored.
You are now ready to take photos with the set focus
mode.