How To Set A Logo To Be Stamped On A Picture - Logo - Pentax EI-200 Operating Manual

How to set a logo to be stamped on a picture - Logo

You can stamp a logo saved in the memory card on a picture.
A logo file is not attached with when the camera has just been purchased, so this function can not be
used at present.
Retrieve the logo file
Retrieve the logo file in the memory card.
Stamping Position
Upper right
[Image Stamp] menu
68
Center Lower left
1
Show [Logo Stamp] screen.
1Install the memory card containing the logo file.
2Turn on the power supply and set the mode dial to the
capture mode mark.
3Press the menu button, and the [Capture Settings]
menu appears.
4Press the right arrow of the four-way controller twice,
and the [Image Stamp] menu appears.
5Press the lower arrow of the four-way controller twice,
and [Logo] is displayed in highlighted text.
6Press the left soft key to select [Edit] on the soft menu.
The [Logo Stamp] screen is then displayed.
Lower right Upper left