Transmitting/Receiving Pictures To/From Other Cameras Having Digita Installed
It is possible to transmit/receive pictures to/from other cameras having Digita installed.
• It is possible to transmit/receive pictures to/from another EI-200 cameras or other infrared data
transmitter compatible cameras having Digita installed.
• Please be careful to remember that a lot of the battery power will be used up when transmitting/
receiving. It is recommended that you use an AC adapter (available separately) when transmit-
ting/receiving. However, when connecting an AC adapter, please make sure that you turn off the
power supply to this camera.
To transmit pictures
To transmit pictures saved on the memory card to another camera having Digita installed.
Transmitting/Receiving Pictures To/From Other Cameras Having Digita Installed
1
To prepare for transmission
1Install the memory card on which pictures to be
transmitted are saved.
2Turn on the power supply to set the mode dial to the
review mode (
The pictures saved on the memory card are displayed
on the edit screen.
2
To select pictures
1Press the left and right arrows on the four-way controller
to scroll the pictures until the cursor points to the picture
to be sent.
).
127