Pentax EI-200 Operating Manual page 69

[Text Stamp] screen after setting
Position
You can set the position of the input letters to be stamped. Use the right and left arrows of the four-
way controller for selection. Each time you press the right arrow, the following stamping position
options will be displayed in this order:
[Upper Right] / [Center] / [Lower Left] / [Lower Right] / [Upper Left]
Background of Letters (Transparency)
When stamping letters on a picture, you can decide how the image corresponding to the input
letters to be stamped is handled. Use the right and left arrows of the four-way controller for
selection.
[Opaque] ....Background (or background color) is provided for the input letters to be stamped on a
picture.
[Semi] ........A semi-transparent background (or background color) is provided for the input letters
to be stamped on a picture.
[Clear] ........No background (or background color) is provided for the input letters on a picture
(i.e., only the letters are stamped).
Color of Letters
You can set the color of the letters to be stamped. Use the right and left arrows of the four-way
controller for selection. Each time you press the right arrow, the following choice of colors to be
set will be displayed in this order:
[Red] / [Green] / [Blue] / [Cyan] / [Magenta] / [Yellow] / [Black] / [White]
Background color
When you select [Clear] for the background of letters, you can set the background color of the
letters. Use the right and left arrows of the four-way controller for selection. Each time you press
the right arrow, the following choice of colors to be set will be displayed in this order:
[Red] / [Green] / [Blue] / [Cyan] / [Magenta] / [Yellow] / [Black] / [White]
3
Setting the stamping format
1Press the down arrow of the four-way controller while
the text stamp [On] is displayed in highlight text and
input letters are displayed. [Placement] is displayed in
highlighted text.
2Press the right and left arrows of the four-way controller
to select stamping position.
3Repeat the same procedure until the background of
letters, the color of the letters and the background
color are selected.
4After setting up the necessary items, press the right
soft key to select [Exit] on the soft menu, and the
[Image Stamp] menu is displayed.
If you want to resume the initial state, press the left soft
key to select [Default] on the soft menu.
5Press the right soft key to select [Exit] on the soft menu.
You can now stamp input letters on a picture according
to the settings.
Stamping Date & Time And Text On A Picture
67