To Receive Pictures - Pentax EI-200 Operating Manual

To receive pictures

To receive pictures transmitted from other Digita equipped cameras.
Please make sure that the memory card has enough capacity left to save pictures that are
going to be transmitted. If there is not enough capacity left on the memory card, it is not
possible to receive pictures.
Transmitting/Receiving Pictures To/From Other Cameras Having Digita Installed
2Press the soft left key to select the soft menu [Send].
The message for preparation confirmation on the
receiver side is displayed.
3Make sure that the receiver side is in the receiver
mode, then press the left soft key to select the soft
menu [Continue].
The [Receiving camera ready?] message is displayed
on LCD monitor, and the selected pictures are
transmitted.
Important
If corrupt data is found in the pictures being
transmitted, the transmission is canceled at that point
in time. The remaining pictures will not be transmitted.
1
To prepare to receive pictures
1Install a memory card which has enough capacity left
to save the pictures that are to be received.
2Turn on the power supply and set the mode dial to the
review mode (
The pictures saved on the memory card are displayed
on the edit screen.
The received pictures are saved after the last picture
saved in the memory card, in shooting date order.
).
129