Printing Using A Jetsend Compatible Printer - Pentax EI-200 Operating Manual

Printing using a JetSend compatible printer

How to print using a JetSend compatible printer with the memory card in this camera will now be
explained.
• Printers other than JetSend compatible printers cannot be used for printing in the following
procedure.
• In this manual, we will explain the procedure for printing, using Photo Smart P1000/P1100 by
Hewlett Packard as an example. The actual procedure may differ depending on what printer is
used. Please refer to the user's manual attached to the printer, for operation.
• Please be careful to remember that a lot of the battery power will be used up when printing. It
is recommended that you use an AC adapter (available separately). However, when connecting
an AC adapter, please make sure that you turn off the power supply to this camera.
1
Preparation for printing
1Turn on the power supply of the printer, and insert
paper to be printed on.
Please refer to the user's manual attached to the printer
using for operation.
2Install the memory card on which pictures to be printed
are saved, in this camera.
3Turn on the power supply and set the mode dial to the
review mode [Edit Icon].
Pictures saved on the memory card will be displayed
on the screen.
2
Selecting pictures
1Press the left and right arrows on the four-way controller
to scroll the pictures until the cursor points to the
picture to be printed.
2Press the left soft key to select the soft menu [Mark].
The lower right of the selected picture will be clipped
and the soft menu [Unmark] is displayed.
Printing The Pictures You Have Taken
121