Erasing All The Data In The Memory Card - Formatting The Card; Setting The Display Mode Of The Date - Set Date And Time - Pentax EI-200 Operating Manual

Erasing all the data in the memory card - Formatting the card

Erasing all the data stored in the memory card
• Do not remove the memory card while formatting. Doing so may damage the memory card and
can not be used again.
• If this operation is performed, all the protected pictures are erased. Be sure to backup the
required pictures on a PC.
[Preferences] setting menu

Setting the display mode of the date - Set date and time

Changing the display mode of the date
For the method of correcting the date, refer to [Setup guide].
Setting the display mode
Month/Day/Year 24-hour display, Day/Month/Year 24-hour display, Day/Month/Year 12-hour
display, Year/Month/Day 24-hour display, Year/Month/Day 12-hour display
74
1
Formatting the card
1Set the memory card to be formatted.
2Turn on the power to set the mode dial to the capture
mode mark.
3Press the menu button to display [Capture Settings]
menu.
4Press the right key on the four-way controller three
times to highlight the [Preferences] menu.
5Press the down arrow on the four-way controller twice
to highlight [Format Card].
6Press the left soft key to select the soft menu [Format].
A format confirmation screen will appear on the
display.
7When formatting, press the middle soft key to select
the soft menu [Format].
When canceling the format, press the right soft key to
select the soft menu [Cancel].